Manual and Automated Cell counting

Instruments

Manual and Automated Cell counting

No more clicking. Just press the button!

Cell counting is a general quality control analysis in research. 

Manual cell counting is simple but very time-consuming. Because of the human factor it is as well very subjective and can be variable.
Automated cell counters are equipped with high quality optics and innovative software to bring you cell concentrations with high speed and viable, accurate and reliable data.

Brightfield Cell Counting (Manual and automated)
Fluorescence Cell Counting
Microbial Cell Counting (Yeast and Bacteria)

Stain > Load > Count > Review & export

Manual Brightfield cell counting chambers

C-Chip 2-channel and C-Chip 4-channel are disposable plastic hemocytometers

A precision disposable plastic hemocytometer, developed to solve the problems of conventional Glass hemocytometer.

  • Reduced exposures to infectious and hazardous samples
  • Eliminates the need of washing for reuse
  • Guaranteed repeatability and reliability
  • Made of sturdy and strong Quartz grade optical plastic
  • No coverslip required
  • Bright grid pattern

For more information please download the brochure C-Chip 


 

Automated Brightfield cell counters

Trypan Blue Cell Counters 

Logos Biosystems LUNA-II (Available in Spain and Portugal)
Nanoentek EVE Plus
CountStar Biolab
Slides for Countess and Countess-II 

LUNA-II™ Automated Cell Counter

(Available for Spain/Portugal)

Small but powerful, the LUNA-II™ is counting cells quick and easy. No more tedious manual counting!

Simply insert your sample and the LUNA-II™ does the rest: autofocus, adjust light, and count in just 15 seconds.

Accurately detects total, live and dead concentrations ranging from 5 x 104 to 1 x 107 mL/cells and cell sizes from 3 to 60 µm

  • Can use disposable or re-usable slides.
  • Trypan Blue or LUNA Biosafe Stain

The LUNA-II™ is an automated cell counter that gives you the ultimate brightfield cell counting experience. Press count and the LUNA-II™ does the rest – bringing your cells into the sharpest focus, adjusting light levels, capturing a high-resolution image, and analyzing the image to produce accurate cell count and viability data. 

Available Cell counting slides, reusable or disposable
Disposable: L12001, L12002, L12003, L12004 
Reusable: L12011, L12012, L12010

For more information please download the brochure Luna II automated cell counter
 

NanoEntek Eve Plus automatic cell counter

EVE™ Plus is user-friendly, compact design for simple, fast, automated cell count and viability measurements within 1 second. 

It provides data on cell size and is compatible with various types of eukaryotic cells, regardless of whether the cell size is small or large.

  • Less than 1 sec for cell counting
  • Easy to use
  • Accurate by improving HW and algorithm

Measures cell concentrations ranging from 1 × 104 to 2 × 107 cells/mL and cells with sizes from 5 µm to 60 µm.

Disposable slides: EVS-1000, 1000 slides, 2000 counts

For more information please download the brochure Eve PLus
 

Countstar® BioLab Automated Cell Counter

Countstar BioLab is a cell counting and analyzing instrument developed on the basis of classic trypan blue staining. Integrating advanced optical imaging technology and intelligent image recognition technology.

Disposable slides: 00 00 02 04 0001    -   00 00 02 04 0010

For more information please download the brochure Countstar brochure all models 

C-Slide – Countess Cell counting chamber slides

C-Slide is a cell counting chamber slide used with automated cell counters such as Countess, Countess II, and even EVE/EVE Plus cell counters.

C-Slide is the same as Countess Slide. NanoEnTek is an original developer and manufacturer of Countess and Countess Slide.

Unlike a conventional hemocytometer, C-Slide is completely disposable and packed individually, hence convenient and contamination free.

  • No need for coverslips
  • No need for washing (Disposable)
  • Reduce exposure to infectious samples and contamination
  • Reproducibility and reliability guaranteed
  • Made of sturdy quartz grade optical plastic


Slides are CS-050, 1000 slides, 2000 counts

For more information please download the brochure C-Slides 
 

Dual Fluorescence Cell Counter LUNA-FL™

(available in Spain and Portugal)

Equipped with dual fluorescence and brightfield optics, the LUNA-FL™ allows the sensitive detection of most cell types. 

The LUNA-FL™ can distinguish primary cells such as PBMCs, splenocytes, neutrophils, and stem cells from undesirable debris for accurate cell count and viability results. Can use disposable or re-usable slides.
4 applications in one system:

  • Brightfield cell counting
  • Fluorescence cell counting
  • Yeast cell counting
  • GFP transfection assays 

This versatile little counter sits comfortably in a cell culture hood or on your benchtop to fit seamlessly into your workflow.

Disposable slides: L12005, L12006, L12007
Reusable: L12011, L12012, L12010

For more information please download the brochure Luna FL
 

LUNA-STEM™ Automated Fluorescence Cell Counter for Stem Cells & SVF 

(available in Spain and Portugal)

The LUNA-STEM™ takes adipose-derived stem cell and SVF samples to count live nucleated cells, dead nucleated cells, and non-nucleated cells with precision and consistency for downstream procedures. 

When using tissue-derived cells such as stem cells or the cells from the adipose stromal vascular fraction (SVF), knowing cell concentration and viability is crucial to ensure and control the quality of downstream procedures.

The LUNA-STEM™ is equipped with dual fluorescence and brightfield optics to distinguish live and dead nucleated cells from non-nucleated cells. 

Disposable slides: L12005, L12006, L12007
Reusable slides: L12011, L12012, L12010

For more information please download the brochure Luna Stem
 

ARTHUR - Fluorescence Cell Counter

Arthur is a 3-channel desktop image analyzer that allows users to perform assays for cells in suspension, including GFP and RFP expression.

Arthur™ is a solution to assays of a wide variety of eukaryotic cells. Depending on complexity of a assay and the number of fields captured,
it takes Arthur™ 10 seconds to 2 minutes to complete the assay with only 25 μL of sample.

Arthur™ features two fluorescent channels (green & red) as well as bright field.
Performs a broad range of assays: cell counting & viability, GFP&RFP expression, Annexin V apoptosis analysis, and cell cycle analysis.

Consumables are slides AC0500 and alignment beads AB0100

For more information please download the brochure Nanoentek Arthur
 

ADAM MC2 - Automated cell counter

ADAM-MC2, an automated fluorescence cell counter, performs viability and cell counting measurements using the PI (Propidium Iodide) staining method, combined with advanced image analysis. It only takes 25 seconds to get the result.
It measures the number of total cells, viable cells, non-viable cells and shows viability results.

  • Less than 25 sec to get results
  • Cell therapy quality control
  • Cells countable with ADAM-MC2: stem cell / CAR-T cell / CAR-NK cell / Adipose-derived stem cell
  • Automated image analysis
  • Accurate result, sensitive CMOS detection, and precise automatic stage

Consumables are slides AD4K-200 and other consumables ADR-1000 solution, ADB-500 calibration bead

For more information please download the brochure ADAM-MC2
 

 

ADAM CellT – Automated cell cunter for cGMP

It takes only 25 seconds for ADAM-CellT to present results. The Adam-CellT has an easy-to-use built-in tablet and complies with 21 CFR part 11.
When the 21 CFR part 11-mode is activated, data can’t be modified by any user.

Every action is recorded in an audit trail included the date, time and specific details of the action.
ADAM calibration beads allow quick diagnosis when problems occur, which ensures accuracy of the instruments.

  • Compliance with 21CFR part 11
  • Automated image analysis
  • Accurate results
  • Sensitive CMOS detection and pecise automatic stage
  • Auto focus
  • Cell therapy quality control


The consumables are slides: AD2K-200, AD4K-200
For more information please download the brochure ADAM-CellT

COUNTSTAR® Rigel S2 – Rigel S3 – Rigel S5 and Rigel S6 Fluorescence Cell Analyzers

The Countstar System combines the two fluorescence channels plus a bright field digital microscope, an image cytometer, and a cell counter in a single bench-top instrument. This application-driven, compact, automated cell imaging system provides an all-in-one solution for cell counting, cell viability and cell transfection efficiency through the use of preconfigured biological applications. 

Specifically optimized for analysis of primary cells from peripheral blood, including PBMC, 
CAR-T, NK cell and MSC, which commonly used in cell therapy.

  • Automatic Detection 5 Samples in one single test sequence.
  • GMP and 21 CFR Part 11 ready
  • Multi channel, multi functions
  • "Fixed focus" patent, no manual focusing.
  • All in one design- Touch screen user interface


Disposable slides: 00 00 02 04 0001    -   00 00 02 04 0010
For more information please download the brochure Countstar Rigel systems
 

Automated Yeast Cell Counter Logos LUNA-II YF™

(available in Spain and Portugal)

The LUNA-II YF™ has an autofocusing cell counting and declustering algorithm that counts individual yeast cells in just 15 seconds.

Brewing and winemaking industries, the quantity of yeast pitched to initiate fermentation directly affects the flavor, aroma, and quality of the final product. 

Although yeast can be pitched by weight or volume, such methods are inexact and highly variable. Use the LUNA-II YF™ to get accurate and reproducible yeast cell counts in as little as 15 seconds

Disposable slides: L12005, L12006, L12007 (click here to go directly to our webshop)
Reusable: L12011, L12012, L12010 (click here to go directly to our webshop)

For more information please download the brochure LUNA-II Yeast cell counter 
 

Automated Yeast Cell Counter Countstar® BioFerm

The Countstar® BioFerm Automatic Yeast Counter combines traditional Melanie, Methylene Blue or Methylene Violet staining with high-resolution imaging and intelligent image recognition for accurate and consistent detection of yeast concentration and viability with a powerful Data Management System.

  • Fast and easy operation, 20s for each sample
  • Dilution Free ( 5x104 - 3x107 cells/ml )
  • Safe handling and disposal of samples with traditional stains such as Methylene Blue
  • Data easily comparable with a hemocytometer
  • Unique “Fixed Focus” image analysis provides reproducible data
  • Low cost and waste per test using disposable slides
  • Automatic Detection 5 Samples in one single test sequence.


Disposable slides: 00 00 02 04 0001    -   00 00 02 04 0010
For more information please download the brochure countstar brochure all models
 

Microbial Cell Counter Logos QUANTOM Tx™

(available in Spain and Portugal)

The QUANTOM Tx™ Microbial Cell Counter is an image-based, automated cell counter that can detect individual bacterial cells in few minutes. 

No more waiting days to count CFUs. In less than 30 seconds, the QUANTOM Tx™ scans up to 10 fields of view to produce accurate single bacterial cell counts.

The advanced software can account for the varying shapes, sizes, and arrangements of different bacteria.

Bacteria are an incredibly diverse group of organisms that come in multiple shapes, sizes, and arrangements. Colony counting is a highly variable and unreliable, as it is only an estimate of the viable cells present.

Disposable slides: Q12001, Q12002 (click here to go directly to our webshop)
For more information please download the brochure Quantom Tx
 

LEARN MORE ABOUT OUR CELL COUNTING INSTRUMENTS

Request a quote or ask your question about our cell counting instruments via the contact options below. We will try to answer your question within one working day.

CONTACTFORM

Direct contact

+31 30 6880771
info@isogen-lifescience.com

OUR OFFICE

Veldzigt 2A
3454 PW De Meern

BUSINESS HOURS

Mo - Fri: 8.30 - 17.00