Power supplies

The EV 265 CONSORT POWER SUPPLY is ideal for electrophoresis and semi-dry blotting techniques. The electrical leads from all HOEFER gel and blot units are fully compatible without the need for adapters.

• Constant voltage, constant current, or constant power mode with automatic crossover.
• Programmable step function. Stores and recalls as many as 9 sets of frequently used parameters.
• Timer or volt-hour controlled with alarm.
• Automatic recovery after power failure.
• Precise, reproducible settings and readouts in single-unit increments (1 V, 1 mA, 1 W, and 1 min).
• Manual programming mode allows temporary changes to parameters without interrupting the run.
• Integral data-logger periodically stores

The high current PS 2A200 POWER SUPPLY is ideal for all types of electrophoresis blotting applications and for short electrophoresis runs.

• Maximum output: 200 V, 2000 mA, 200 W.
• Constant voltage, constant current, or constant power mode with automatic crossover.
• Programmable step function. Stores and recalls 3 protocols.
• Choose from 4 timer options:
  1. Continuous run
  2. Set time run
  3. Set time run followed by a hold at 5 volts
  4. Set volt-hour run.
• Precise, reproducible settings and readouts in single-unit increments (1 V, 1 mA, 1 W, and 1 min).
• Prints a log of run parameters through an RS-232 port.
• Designed for high current applications such as tank blotting.
• Automatic recovery after power failure.
• Compact design saves bench space